Cards reader writer

DL9700 Desktop UHF Reader/Writer

DL9700 Desktop UHF Reader/Writer USB port software included Performance Protocolli supportati ISO18000-6C EPC Gen2 / ISO18000-6B Frequenza ISM 902MHz ~ 928MHz, Or 920MHz ~ 925MHz Customization 860MHz ~ 960MHz Modalità di lavoro FHSS or working mode of fixed frequency pulse transmitting set by software Potenza di trasmissione 17dBm Read-Write performance Velocità di lettura La media è meno di 10ms per 64 bits Distanza di lettura 10cm ~ 15cm Velocità di scrittura 8bits lmeno di 30ms Distanza di scrittura 10cm ~15cm (tag and environment dependent) Read prompt Buzzer Interfaccia USB Port Si Parametri elettrici Power supply USB Powered Power consumption 0.25W Aspetto Dimensione 105mm*70mm, Spessore:10mm Peso 56g Ambiente lavorativo Temperatura supportata -30°C～70°C

Read more

Cards reader writer, Rfid reader writer

ACR 122 NFC smart card reader with SDK

ACR122 NFC Contactless Smart Card reader, with SDK. This kit has been developed on RFID 13,56 MHz technology. It supports ISO 14443 A and B, NFC and FeliCa standards. This development kit let you work on new NFC tech. Details USB Full Speed (12 Mbps) USB PnP Bi-Color LED Built-in Antenna NFC Reader ISO/IEC18092 (NFC) compliant NFC Tags Access Speed = 424 kbps Contactless Smart Card Reader Support FeliCa card Support ISO 14443 Type A & B cards - MIFARE® cards (Classics, DESFire) PC/SC and CCID Compliant CE and FCC Certificated RoHS Compliant User Controllable Buzzer (optional) SAM Socket (optional)

Read more

Cards reader writer, Chip reader writer

OMNIKEY 5121 – CardMan Embedded 5121 Reader Board

OMNIKEY 5121 - CardMan Embedded 5121 Reader Board OMNIKEY Double interface to read and write (encode) chip cards and contactless 13.56 MHz cards. Details The CardMan 5121 is a dual interface PC-linked reader that will read / write to both a 13.56 MHz contactless smart card and virtually any contact smart card. The dual interface feature economically supports end-user environments where both contactless and contact smart card technology may be in use.

Read more

Cards reader writer, Rfid reader writer

Contactless coupler ACG HF Mifare Easy

CONTACTLESS COUPLER ACG HF MIFARE EASY COMPACT PLUG & PLAY MODULE / RDHC-0502N0-01 RF Transmit Frequency 13.56MHz Supported Standards ISO14443A Supported Tag-ICs mifare® Standard mifare® 4k mifare® Pro X mifare® Ultralight mifare® DESFire (Serial No. only) SLE66R35 SLE44R35 ISO 14443A Tags Host Communication Point-to-Point Communications Interface RS232 Serial Interface Communications Protocol Specific ASCII and Binary Protocol Communications Parameter 9600 Bit/s to 57600 Bit/s, 8, N, 1 Firmware Boot-Loader no Software, Driver API - DLL Power Supply 5VDC ± 10% regulated Current Consumption 150 mA < 10mA at power down mode Reading distance Up to 85mm, depending on tag and antenna RF Transmission Speed 106 kBit/s Antenna Integrated Input/Output Connector 2 status indicator LED lines, 1 I/O Port Size (LxWxH) 70.0x45.0x12.1mm ± 1.0mm / 2.76x1.77x0.48 Inch ± 0.04 Inch Weight 16g ± 10% / 0.04 lb± 10% Operating Temperature -20°C to + 80°C / -4F to +176F Storage Temperature -40°C to + 85°C / -40F to +185F Firmware Version 1.0 MTBF 200.000 h Approvals/Compliances EN 300-330, CE, FCC Part 15,...

Read more

Cards reader writer, Rfid reader writer

RFT-232-2 – Reader USB RFID 13,56 khz ISO15693

RFT-232-2 - Reader USB RFID 13,56 khz ISO15693 A-B Desktop reader RFID 13,56Khz It reads RFID cards and tags. Frequency 13,56KHz ISO 14443 A&B and ISO 15693 Applications: - Control access - Card issuing - Parking meters - Public phones - Presence surveyors   Technical details: Voltage: +5VDC (± 5%) Absorption: <120mA Technology: 125Khz EM-TK Read distance: 0~7cm Interface: PS2, USB, TCP/IP, RS232/485, TTL, Wiegand Baud Rate: 9600 BPS Weight: circa 190g Dimensions: 122mm (A) x99mm (L) x32mm (P)

Read more

Cards reader writer, Rfid reader writer

Contactless coupler ACG LF MultiTag 125 kHz

CONTACTLESS COUPLER ACG LF MultiTag 125 kHz E 134.2 kHz SR-003/006-01 CONTACTLESS COUPLER ACG to encode 125 kHz and 134.2 kHz cards. Details Low Frequency (125/134.2 kHz)· Frequency Supplier/Chip Supported by LF (125/134.2 kHz)   LF MultiTag   Philips Hitag 1 X Hitag 2 X Hitag S X EM Microelectronic Q5 X EM4X02 X EM4X05 (ISO FDX B) X EM4X50 X Texas Instruments TI-RFID Systems 134.2 kHz 64Bit R/O X TI-RFID Systems 134.2 kHz 64Bit R/W X TI-RFID Systems 134.2 kHz 1088Bit Multipage X ·                     Standard Frequency Standard Supported by LF (125/134.2 kHz)   LF MultiTag   ISO 11784 X ISO 11785 X ISO 18000-2 X

Read more

Cards reader writer, Chip reader writer

Contactless coupler ACG

CONTACTLESS COUPLER ACG MULTI ISO RDHC-0202N0-02 / RDHC-0203N0-02 Contactless Coupler ACG MULTI ISO ready for integration. It is equipped with data sheets and power switches. Code: RDHC-0202N0-02 / RDHC-0203N0-02 Details Supported Tag-ICs mifare® Standard: mifare® 4k mifare® Pro mifare® Ultralight mifare® DESFIRE mifare® SmartMX I-CODE SLI (SL2 ICS 20) I-CODE EPC (SL2 ICS 10) I-CODE UID (SL2 ICS 11) I-CODE NFC (Reader To Tag Mode) SLE 55Rxx SRF55VxxP +S SLE 66CL160S SLE 66CLX320P SR176 SRIX4K LRI 64 LRI 512 EM4135 KSW Temp Sens® Tag-it™ HF-I Standard Tag-it™ HF-I Pro Jewel Tag Sharp B ASK GTML ASK GTML2ISO TOSMART P032/P064 ISO14443A Tags ISO14443B Tags ISO15693 Tags Host Communication: Point-to-Point Communications Interface: RS232 RS422 / RS485 Communications Protocol: Specific ASCII (not for RS485) or Binary Protocol Communications Parameter: 9600 Bit/s to 115 kBit/s, 8,N,1 Firmware Boot-Loader Supported: Via Serial Interface S/W Driver: Virtual COM port Driver, API - DLL (VC++) Power Supply: 5V DC ± 10% regulated Current Consumption: 150mA < 10mA at power down mode Reading distance: Up to 75mm / 2.95 Inch, depending on tag RF Transmission Speed: Up to 848 kBit/s Antenna Integrated Input/Output Connector: 2 status indicator LED lines, 1 I/O Port, SAM Socket Size: (LxWxH) 70.0x45.0x12.1mm ± 1.0mm...

Read more

12